Toyo Engineering & Construction Jobs and Careers

https://jobholders24.com published Worldwide Job Circular. You  can get your favorite jobs by this site. jobholders24.com always published all updated jobs circular. jobholders24.com published Jobs in UAE; Jobs in Qatar; Jobs in Saudi Arabia; Jobs in Kuwait; Jobs in Oman; Jobs in Bahrain; Jobs in India; Jobs in Singapore; Jobs in Malaysia; Jobs in Philippines; Jobs in USA; Jobs in UK & Europe; Jobs in Indonesia; Jobs in Egypt; Jobs in Pakistan; Jobs in Africa; Jobs in Thailand; Jobs in Australia; Jobs in Canada; Jobs in Jordan; Jobs in Lebanon ;Jobs in Iraq; Jobs in Dubai; Jobs in Abu Dhabi; Jobs in Doha etc.

Toyo Engineering & Construction Jobs and Careers

Layout & Piping Engineer (Contract)

Job Responsibilities:
  • Establish standard and concept for the work to comply with job requirement.
  • Responsible in pipe routing and equipment layout planning study.
  • Responsible in engineering design works such as plot plan, key plan, Underground and Aboveground piping arrangement, construction isometric and pipe support detail drawing, field fabrication part, etc.
  • Responsible to review information drawings such as civil information, nozzle orientation, vessel clip, instrument component information and process information (piping isometric for calculation of hydraulic delta-p, etc.)
  • Review all internal design check (IDC) documents from all disciplines.
  • Preparation of BOM/BOQ for material requisition, cost estimation and construction work volume estimation.
  • Participate in the studies of ITB, compilation of proposal, and Bid tabulation.
  • Provide technical specification for material procurement and ensure the materials are purchased within budget, timely, and meeting the technical requirement.
  • Coordination work with Civil & Structural, Mechanical, Instrumentation, Electrical, and Fire & Gas interfacing with regard to layout and piping design.
  • Liaise with clients and vendors for technical issues.
  • Responsible in planning, scheduling, quality control of designated project to ensure that objective of the project are accomplished within the prescribed time frame and budget.
  • Assist construction and commissioning activities (Field/Site works).
Job Requirements:
  • Candidate must possess at least Degree in Mechanical or Material Engineering, or equivalent
  • Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
  • Familiar with international codes and standard (especially ASME31.3, ASME, API, PTS, SHELL DEP, etc.)
  • Good knowledge in preparation of engineering specifications and Job instructions for piping designs, insulation, painting etc.
  • Good knowledge in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
  • Familiar with coordination work with Civil & Structural, Mechanical, Instrumentation and Electrical interfacing with regard to layout and piping design.
  • Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
  • Having previous experience in Greenfield, Brownfield and plant modification projects.
  • Able to work in team and possess excellent interpersonal, communication and writing skills.
  • Well verse with CAESAR II and AUTOCAD software.
  • Experience in 3D CAD software such as S3D / PDS / CADWORX / PDMS / E3D would be added advantage.
  • PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).
  • Good command in English (spoken and written).

Junior Project Engineer (Permanent)

Job Responsibilities:
  • Responsible for the implementation of the project execution plan, the monitoring and control of the Engineering Schedule and coordination with multiple disciplines, vendors and third parties.
  • Reviews and proposes engineering deliverables, vendor/procurement activities and manpower requirements for approval of Project Manager.
Job Requirements:
  • Possess a Degree in any Engineering discipline.
  • Minimum 1 – 2 years working experience in the same field, preferably in Oil & Gas industry.
  • Fresh graduate with excellent academic is encourage to apply.
  • Computer literate in Microsoft Project & Office, Primavera, etc.
  • Able to work in team and possess excellent interpersonal, communication and writing skills.
  • Good command in English and Bahasa Malaysia (spoken and written)

Layout & Piping Engineer (Permanent)

Job Responsibilities:
  • Establish standard and concept for the work to comply with job requirement.
  • Responsible in pipe routing and equipment layout planning study.
  • Responsible in engineering design works such as plot plan, key plan, Underground and Aboveground piping arrangement, construction isometric and pipe support detail drawing, field fabrication part, etc.
  • Responsible to review information drawings such as civil information, nozzle orientation, vessel clip, instrument component information and process information (piping isometric for calculation of hydraulic delta-p, etc.)
  • Review all internal design check (IDC) documents from all disciplines.
  • Preparation of BOM/BOQ for material requisition, cost estimation and construction work volume estimation.
  • Participate in the studies of ITB, compilation of proposal, and Bid tabulation.
  • Provide technical specification for material procurement and ensure the materials are purchased within budget, timely, and meeting the technical requirement.
  • Coordination work with Civil & Structural, Mechanical, Instrumentation, Electrical, and Fire & Gas interfacing with regard to layout and piping design.
  • Liaise with clients and vendors for technical issues.
  • Responsible in planning, scheduling, quality control of designated project to ensure that objective of the project are accomplished within the prescribed time frame and budget.
  • Assist construction and commissioning activities (Field/Site works).
Job Requirements:
  • Candidate must possess at least Degree in Mechanical or Material Engineering, or equivalent
  • Minimum 5 years of piping design experience in Oil & Gas, Petrochemical industries.
  • Familiar with international codes and standard (especially ASME31.3, ASME, API, PTS, SHELL DEP, etc.)
  • Good knowledge in preparation of engineering specifications and Job instructions for piping designs, insulation, painting etc.
  • Good knowledge in Plant Layout Planning and Detailed Piping Design in view of Construction, Process Flow Scheme, Machinery Operation etc.
  • Familiar with coordination work with Civil & Structural, Mechanical, Instrumentation and Electrical interfacing with regard to layout and piping design.
  • Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
  • Having previous experience in Greenfield, Brownfield and plant modification projects.
  • Able to work in team and possess excellent interpersonal, communication and writing skills.
  • Well verse with CAESAR II and AUTOCAD software.
  • Experience in 3D CAD software such as S3D / PDS / CADWORX / PDMS / E3D would be added advantage.
  • PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).
  • Good command in English (spoken and written).

Project Engineer (Permanent)

Job Responsibilities:
  • Responsible for the implementation of the project execution plan, the monitoring and control of the Engineering Schedule and coordination with multiple disciplines, vendors and third parties.
  • Reviews and proposes engineering deliverables, vendor/procurement activities and manpower requirements for approval of Project Manager.
Job Requirements:
  • Possess a Degree in any Engineering discipline.
  • At least 7 years of working experience in the same field, preferably in Oil & Gas industry
  • Minimum 5 years working experience in EPCC Project Management projects would be an advantage.
  • Good knowledge and understanding of project execution plan, project procedures, vendors/procurement activities and job close.
  • Able to perform multitask and work on a number of projects at the same time.
  • Computer literate in Microsoft Project & Office, Primavera, etc.
  • Able to work in team and possess excellent interpersonal, communication and writing skills.
  • Good command in English and Bahasa Malaysia (spoken and written)

Secretary (Contract)

Job Responsibilities:
  • Provide secretarial administrative and operational activities to the department which includes correspondence, time management, typing, filing, meeting arrangement and upkeep office equipment.
  • Generate Engineering Specification, Mechanical Datasheet, Bill of Material
  • Coordinate travel/lodging arrangements and manage staff’s travelling schedules
  • Schedule meetings and arrange conference rooms
  • Organize events and volunteer activities
  • To undertake other related jobs as assigned from time to time by the Superior
Job Requirements:
  • Candidates must a least Diploma in Secretarial/Business Studies/Admin or equivalent
  • Minimum 3-5 years working experience in the related filed is required
  • Required language(s) : English and Bahasa Malaysia
  • Excellent knowledge in Microsoft Words and Excel
  • Multitasking and time-management skills with the ability to prioritize tasks
  • Pleasant personally, good interpersonal and communication skills
  • Experience in handling CIDB and OHSAS 18001 audit would be advantages

Construction Planning Engineer (Permanent)

Job Responsibilities:
  • Cost Estimation
    – Review the ITB and determines the project/proposal requirements
    – Estimate the Construction Cost (Direct & Sub-con cost)
    – Estimate TOYO-M Field Expenses (Indirect cost)
  • Planning & Monitoring
    – Construction Planning – Compile work volume and finalize work breakdown structure, prepare construction schedule and estimate projected man-hours
    – Construction Planning details
    – Construction Execution
    – Construction Progress and Monitoring – handle daily task monitoring by referring to weekly schedule
    – Construction close-out
  • Sub-contracting – issuance of ITB and Bid Evaluation, conduct pre-award meeting and final technical and commercial clarification and handling subcontracting close out
  • Work Quality standards – maintain quality control by utilizing the standard in house tools and format.
Job Requirements:
  • Candidates must possess a relevant Engineering Degree
  • At least 5 years of working experience in Oil & Gas and Petrochemical industries or equivalent
  • Experience in Project Engineering, Preparation of Inquiry Documents, Commercial/Technical Bid Evaluation, MTO, Cost Estimation and Inter-discipline coordination is an advantage
  • Able to understand Construction Drawing & Specification (for various discipline eg. Civil, Structural, Mechanical, Piping, Electrical, Instrument)
  • Able to Take-off work volume from Construction Drawing and prepare the necessary write-up
  • Able to prepare and issue Inquiry Documents to Vendors/Subcontractors and subsequent evaluation and clarification
  • Able to prepare various and relevant reports
  • Able to prepare details Construction Schedule (MS Project/P6) and monitoring
  • Able to interact effectively with Colleagues, Client, Vendors and Subcontractors by phone and email
  • Able to being mobilized to Construction Site (Short/Long Term)
  • Ability to work in teams or as independent, possess excellent communication and interpersonal skills
  • Highly motivated to learn and will put in the long hours when required
  • Ability to work in teams or as independent, possess excellent communication and interpersonal skills
  • Highly motivated to learn and will put in the long hours when required
  • Steep learning curve is expected
  • Sound knowledge in general office tools (MS Office/Word/Excel/Power Point)
  • Sound knowledge in Auto CAD

Fire & Gas Engineer (Contract)

Job Responsibilities:
  • Responsible for delivering fire protection facilities/ system and gas detection system engineering design work efficiently and in a timely manner during proposal and project delivery.
  • Planning & Control (proposal stage)
    – study and understand project requirements for F&G system and ensure compliance to ITB, applicable codes and standards plus local authorities requirements.
  • Engineering Design Work
    – prepare engineering design work for F&G in compliance to requirements which involved in the preparation of fire safety design documents and analysis including but not limited to:-
    o Fire Protection System
    o Fire water network hydraulic calculations
    o Fire protection equipment layout
    o Fire and Gas cause-and-effect diagrams
    o Fire and Gas detection layouts
    o Fire fighting and safety equipment specifications
    o Passive fire protection studies
    o Fire protection design basis
    o Fire and Gas Design & Control Philosophies
    o Fire Risk Analysis Study
    o Other safety engineering deliverables
  • Installation/pre-commissioning activities and BOMBA matters
    – prepare procedures for testing and pre-commissioning activities, coordinate work between sub-contractors and vendors, construction team and owners
    – participate in the testing and pre-commissioning activities
    – assists authority coordinator to prepare related engineering documents for authority submission.
    – Attend BOMBA site inspection and carry out briefing on technical aspects for the operation
Job Requirements:
  • Candidates must posses Chemical or Mechanical Engineering background from recognized University.
  • At least 2 – 3 years of engineering design experience in Fire Protection System and Fire & Gas Detection System in Oil & Gas and Petrochemical field.
  • Possess positive working attitude in acquiring basic knowledge of multitude engineering disciplines ? Chemical, Instrument, Electrical, Mechanical, Piping Design and Civil.
  • Good skills and experience to operate Auto-CAD is an added advantage.
  • PC literate (Ms Word / Excel / PowerPoint / Ms Project).
  • Ability to work in teams and posses excellent interpersonal, communication/presentation and report writing skills.

Instrument Engineer (Contract)

Job Responsibilities:
  • Responsible for delivering instrument engineering design work efficiently and in a timely manner during proposal and project delivery stage.
  • Preparation of instrument datasheet, instrument list, I/O list.
  • Preparation of instrument sizing for flow element and valves.
  • Familiar with IPF methodology and implementation.
  • Control system such as DCS (Honeywell), ESD PLC, mechanical equipment package control system PLC and relay base system.
  • Preparation of loop drawings, interlock logic diagram.
  • Preparation of cable schedule, cable connection list, junction box schedule, etc.
  • Preparation of typical installation drawing, instrumentation hook-up drawings.
  • Preparation of construction drawings such as instrument plot plan, wiring layout, etc.
  • Preparation of Material Take-off for installations.
Job Requirements:
  • Candidates must possess at least a Degree in Instrumentation or Chemical Engineering background.
  • Minimum 4 years’ experience with at least 5 years of engineering design experience in Oil & Gas and Petrochemical industries.
  • Experienced in handling rejuvenation and revamp project.
  • Familiar with international codes and standard (especially IEC, ISA, etc.)
  • Able to carry out site survey in order to gain required information and/or verification of existing plant documentation.
  • Experienced in Instrument installation or commissioning.
  • Knowledge with SPI INTOOLS software.
  • Good command in Malay and English (spoken and written)
  • Able to work in team and possess excellent interpersonal and communication skills.

Process Engineer (Contract)

Job Responsibilities:
    • Participate in ITB study and prepare bid specifications.
    • Establish standard and concept for the work to comply with job requirements.
    • Lead and Involve in various engineering stage such as Feasibility Study, Basic Engineering Design and Detail Engineering.
    • Preparation Process Drawings such as Process Flow Scheme, Piping & Instrumentation Diagram, Equipment data sheet, Instrument data sheet and other deliverables
    • Interface with other internal disciplines such as Mechanical, Piping, Instrument.
    • Liaise with clients and vendors for technical issues and to define project scope.
    • Planning, scheduling, quality control of designated project.
    • Support pre-commissioning and commissioning activities
  • Able to resolve technical issues.
  • Accountable for success completion of assigned engineering tasks.
  • Assist Team Manager and responsible for Process Team Development and staff training.
  • Responsible to produce work instructions and guidelines to the team.
Job Requirements:
  • Candidate must possess at least Degree in Chemical Engineering.
  • Min. 5 years of process engineering/design experience with ENGINEERING COMPANY in Oil & Gas industries.
  • Familiar with international codes and standard (especially API, PTS (PETRONAS Technical Standard), SHELL DEP, etc.) related to refinery industries.
  • Having previous experience in Greenfield, Brownfield and plant modification projects.
  • Able to work in team and possess excellent interpersonal, communication, presentation and writing skills.
  • Experiences in process simulation (PRO II & HYSYS), flare network simulation (FLARENET), gas radiation (FLARESIM), Heat Exchanger sizing and rating etc.
  • Familiar and well verse with all refinery process design and calculations.
  • Knowledge in AUTOCAD & SPPID is a plus.
  • PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).
  • Good command in English (spoken and written).
  • Willing to travel and station at site.

Senior Process Refinery Specialist (Contract)

Job Responsibilities:
  • Participate in ITB study and prepare bid specifications.
  • Establish standard and concept for the work to comply with job requirements.
  • Lead and Involve in various engineering stage such as Feasibility Study, Basic Engineering Design and Detail Engineering.
  • Preparation Process Drawings such as Process Flow Scheme, Piping & Instrumentation Diagram, Equipment data sheet, Instrument data sheet and other deliverables
  • Interface with other internal disciplines such as Mechanical, Piping, Instrument.
  • Liaise with clients and vendors for technical issues and to define project scope.
  • Planning, scheduling, quality control of designated project.
  • Support pre-commissioning and commissioning activities.
  • Able to resolve technical issues.
  • Accountable for success completion of assigned engineering tasks.
  • Assist Team Manager and responsible for Process Team Development and staff training.
  • Responsible to produce work instructions and guidelines to the team.
Job Requirements:
  • Candidate must possess at least Degree in Chemical Engineering.
  • Min. 10 years of process engineering/design experience with ENGINEERING COMPANY in Refinery industries.
  • Familiar with international codes and standard (especially API, PTS (PETRONAS Technical Standard), SHELL DEP, etc.) related to refinery industries.
  • Having previous experience in Greenfield, Brownfield and plant modification projects.
  • Able to work in team and possess excellent interpersonal, communication, presentation and writing skills.
  • Experiences in process simulation (PRO II & HYSYS), flare network simulation (FLARENET), gas radiation (FLARESIM), Heat Exchanger sizing and rating etc.
  • Familiar and well verse with all refinery process design and calculations.
  • Knowledge in AUTOCAD & SPPID is a plus.
  • PC literate (MS Word, Excel, PowerPoint, and MS Project as a minimum).
  • Good command in English (spoken and written).
  • Willing to travel and station at site.

Utilities Engineer (Contract)

Job Responsibilities:
  • Review and verify engineering design, design calculation, fabrication/construction drawing within the utility packages which include but not limited to equipment, piping, electrical & instrumentation
  • Generate Engineering Specification, Mechanical Datasheet, Bill of Material
  • Produce Material Requisition to Procurement
  • Perform Vendor’s proposal evaluation which includes technical and commercial assessment
  • Coordinate proactively with multi discipline engineer, project and construction division.
  • Support during package fabrication, installation, testing and commissioning.
Job Requirements:
  • Possess a Degree in Mechanical Engineering from a recognized university
  • 5 – 10 years of working experience in handling utility related to projects
  • Familiar with mechanical equipment associated with utility system
  • Sound knowledge on common industry utility (water, gas, steam, compressed air, waste water treatment, etc)
  • Accustomed with general rotating equipment such as pumps, agitators, blowers, compressors, etc.
  • Knowledge with piping and instrumentation within package equipment
  • Experience working in EPC company and/or understanding of package equipment is an added advantage
  • Able to understand engineering drawings and P&ID
  • Independent, self-motivated individual with good communication and interpersonal skills

Kindly write in/email your latest resume, stating education, experience, current and expected salaries, contact telephone number/email together with photocopies of your relevant certificates, a recent passport-sized photograph to the following address:

Toyo Engineering & Construction Sdn Bhd (152170-T)
Suite 25.4, 25th Floor,
Menara Haw Par,
Jalan Sultan Ismail,
50250 Kuala Lumpur,

Email: my.recruitment@toyo-eng.com

Notice: jobholders24.com are not selection recruiters, we are simply sharing accessible occupations in around the world, when click on the apply button, it will divert you to the vocation page of concerned employment supplier, jobholders24.com isn’t including in any phase of enrollment specifically or in a roundabout way, we are not gathering any personal information of job seekers.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button